5 Easy steps:

Step 1 – Prepare the surface

Choose a location for your wall decal

Clean the wall with a mild detergent and water. Make sure to dry the wall thoroughly before starting the application.

Make small pencil marks on the wall (if needed) to mark out the specific location.  

Step 2 – Prepare the decal

Apply the transfer tape to the decal (if it hasn’t been done yet).

Make sure to rub over the edges of the decal so that the transfer tape sticks properly.

Cut off tabs of masking tape and stick half on the transfer tape. Next hold the decal to the desired location on the wall and stick the other half of masking tape to the wall.

Step 3 – Stick the Decal

Make sure the masking tape holds the decal firmly in place.

Start to pull the backing paper from the decal, making sure that the decal sticks to the transfer tape.

When enough of the sticker is exposed and free from the backing press it onto the wall.

Keep pulling the backing until the whole decal has been applied to the wall.

Rub over the transfer tape and decal with a soft cloth to ensure that the entire surface of the decal is stuck firmly to the wall

Step 4 – Remove transfer Tape

Slowly start to pull the transfer tape from the wall (start at the corner). Be careful not to pull the decal with.

Rub over the decal with the soft cloth again be mindful of the decal corners.

Step 5 – Enjoy

Stand Back and enjoy your New space!

By +Chantelle Wasserman

View related posts: